OCM, the compact milling machine for orthopedic body jackets
Polyurethane positives for body jackets and corsets, as well as lower-limb sockets and insole positives.
Compact, easy to learn, designed and built in Italy.
100% Made in Italy
From the patient file to the polyurethane positive, without plaster and without outsourcing: everything in your workshop, with a machine that takes up 80 × 120 cm.
It is the first step into digital for a workshop that mainly produces body jackets: a compact machine, easy to learn, that fits even in small spaces. Besides body jackets it mills lower-limb sockets and insole positives.
Photographs, not renderings.
OCM mills polyurethane positives for body jackets and corsets, and also lower-limb sockets and insole positives. It works blocks up to 500 mm in diameter and 660 mm in height, and mills a body-jacket positive in about an hour.
It takes up 80 × 120 cm, weighs 250 kg, runs on wheels and on 220 V: it fits in a small workshop without special installation.
The patient is captured in a few minutes with a portable 3D scanner, with no plaster cast. The shape is then modelled on the computer with your orthopedic CAD software.
With OrthoCAM, the Satres CAM software included as standard, the program is prepared on the machine in a few guided steps, and the simulator checks the toolpath before starting.
From a block up to Ø 500 × 660 mm the machine mills the positive in about an hour. Chips fall into the collection tray; with the optional extraction system you also work without dust.
About 80 × 120 cm of floor space and 1 metre in height. The machine weighs 250 kg and has wheels, so it is easy to move. The collection tray is standard; the extraction system, for dust-free work, is optional.
A 220 V supply is enough: total installed power is 3 kW.
About an hour, depending on size and chosen finish.
Polyurethane positives for body jackets and corsets, lower-limb sockets and insole positives (up to 18 from one block). For AFOs, KAFOs and cranial helmets you need the fourth axis of ORTHO 1004 EVO.
Yes, to model the patient shape: if you already have one that exports STL files, you keep using it. The milling program is prepared on the machine with OrthoCAM, the Satres CAM software included as standard.
Training takes one or two days, and the OCM training videos are always available. When a Satres machine stops we answer the same day, and the built-in camera lets us watch it at work remotely. The warranty lasts one year and can be extended.
It depends on the configuration. The ROI calculator estimates in 3 minutes how much you save with your workshop's numbers and, at the end, sends you the indicative price.
Yes: in our demo area in Cascina, near Pisa, or remotely by video call. Book a demo.
Read more: the guide to CNC machines for orthopedics →
Body jackets, sockets and insole positives from the patient file, with no casts and no outsourced milling.
From a block up to Ø 500 × 660 mm, while you work on something else.
OrthoCAM and OrthoLIB are included as standard: the program is prepared on the machine in three steps. How the software works →
80 × 120 cm, 250 kg on wheels: it goes where there is no room for an industrial milling machine.
3 kW installed: no three-phase supply to bring into the workshop.
With the built-in camera our technicians watch the job remotely and answer the same day.
Training is included, and the video tutorials are always available.
Every job is saved: a thousand body jackets fit on a USB stick, and remaking a part never starts from scratch.
OCM mills the polyurethane positive you thermoform the device on, as you would on plaster, but starting from the patient file.
The corrective body-jacket positive, ready for thermoforming. Blocks up to Ø 500 × 660 mm, about an hour of milling.
Lower-limb socket positives, ready for thermoforming.
Up to 18 positives, that is 9 pairs, from a single block.
Everything is done on the machine, on the 12-inch touch screen. OrthoCAM and OrthoLIB are included as standard: no external CAM software and no one who knows how to program it.

The STL file exported from your CAD software appears inside the polyurethane block.

OrthoLIB suggests the roughing and finishing parameters: you just pick the level.

The simulator shows the toolpath before starting; then you start from the panel.
| Working Area | X Travel | 700 mm |
| Z Travel | 300 mm | |
| C Axis | Continuous rotation | |
| Drive System | Spindle Speed Range | 24,000 RPM |
| Spindle Line | Spindle Type | Air-cooled electrospindle |
| Spindle Taper | ER 32 manual | |
| Workpiece | Max Workpiece Size | 500 mm (diameter) x 660 mm |
| General Data | Machine Voltage | 220 V |
| Total Installed Power | 3 kW | |
| Floor Space Required | 800 mm X 1200 mm | |
| Machine Height | 1000 mm | |
| Machine Weight (including base) | 250 Kg | |
| Standard Equipment | CNC Controller | Proprietary |
| Chip Collection Tray | ||
| Integrated OrthoCAM and machine kinematic simulator | ||
| OrthoLIB – Automated machining library | ||
| Simplified Programming Workflow | ||
| Optional Equipment | Extraction system | |
Book a free demo in our demo area in Cascina or by video call: we show you the machine and answer your questions on times, costs and incentives.